Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Ultimate Primer on Sex Dolls- What to Expect
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]DISCOVER THE BEST SEX DOLL BEGINNER GUIDE NOW[/center]

A Beginner's Guide To Using A Sex Doll: What To Know Before You Start
So you've ordered your first doll, or you're just about to. Either way, there's a brief spell of slight panic as you unbox a 35 kg silicone human, stand there in your living space, and think: now what? That question is precisely what this guide answers. You will not find filler or assumptions that you already know here, just hands-on guidance on what you will really need in your first week and how to prevent pricey slip-ups in your first month. It is worth reading it twice: once before she arrives and once more after, since the second read makes significantly more sense and lets you catch things you skipped over first time round.

Before you even open the package, certain jobs are worth doing, seeing as once she's out of the package, moving her around becomes considerably harder. Make a decision for where she's going to live: not "somewhere in the bedroom" but a right place, for example a wardrobe, a corner, or a carry case. The last thing you would like is to be making up storage at 11 at night with an unclothed doll in your arms, since dolls are weighty and cumbersome. Dye transfer is a genuine risk, so prepare the space she'll rest on, which might be a bed, floor, or carry case, and be sure it is clean and free of dark-toned blankets, poorly dyed fabrics, and anything else that might bleed colour. Carpet needs something smooth under her. With a low bed, examine it will not give way under her load with time.

Get your supplies ready before she arrives:
1. Cornflour or baby powder (for TPE dolls)
2. A hair dryer (for freeing up joints)
3. A spotless, pale-coloured cloth (for the cloth test)
4. A coarse-toothed wig comb (not a regular hairbrush)
5. Drying supports (for the orifices)
6. Mineral oil made for TPE (where relevant)
7. A soft make-up brush (for powdering)

None of this breaks the bank, but all of it counts. For maybe twenty pounds you get everything in the kit, and that is the variation among a doll that stays in great condition and one that does not. Take your time opening the package in place of tearing into it, and if it is damaged, picture it first, as that is your sole protection for a return claim. When it's open, do a quick inspection: examine for rips in the armpits and groin, examine that all fingers are undamaged, and confirm the head sculpt matches what you paid for. Message the vendor before you do anything else if something's wrong, and take photos of it at once, seeing as a claim gets much harder once the doll has been used or repositioned.

Practically every new buyer is caught off guard by the next element: she will feel rigid. Straight from the factory, the joints are tight, which is perfectly standard and does not mean any part is broken. Before you can pose her, you must free up the joints, and the technique is easy. Soften the TPE at each joint with a hairdryer on a gentle setting, not hot, after that steadily move each joint through its entire range of motion, working through the neck, shoulders, elbows, wrists, hips, knees, and ankles. Do not force anything, and if a joint will not move, warm it up some more. Spend an entire hour on this. It seems excessive, but it is what separates a doll you will in fact pose from one that ends up stuck in the same pose as you gave up.

She's weightier than she looks, which catches everyone. A 35 kg doll doesn't seem like much until you're lifting her from a low position and the load is concentrated in the wrong places, so use correct lifting technique, squatting down and lifting with your legs as opposed to your back. Keep her close to your body by grabbing under the armpits and hugging her if possible, as the closer she is to your centre of mass, the less load you will feel. As TPE and silicone both hold warmth fairly well, she's warmer than you anticipate, and she'll feel less plastic than you were probably expecting the first time you feel her sensibly. People talk about their dolls feeling alive mainly seeing as the cloth truly reacts to feel in a method that catches you off guard, not seeing as of movement or AI.

You should powder her often, since TPE gets clammy in time, especially in hot weather or after cleansing, and a light coating of cornstarch or baby powder applied with a soft powder brush holds the finish smooth and free of dust, so do this following every cleansing session. TPE sheds oil in time and needs replenishment, so oil her now and after that: a small amount of mineral oil specifically formulated for TPE dolls every three months or so maintains the fabric soft and prevents drying out, but do not use too much, as excess oil makes the skin slippery and picks up dust faster than parched skin does.

Consider of cleansing as a procedure, not a one-off. After use:
1. Remove any inserts and wash them separately
2. Clean the cavities with lukewarm water and mild soap
3. Dry everything correctly with drying supports (among 15 and 20 minutes)
4. Powder the exterior with cornstarch or baby powder
5. Put her away with care

Do not treat this as optional, as if you skip it you will get mould developing inside her in a matter of weeks. At roughly 45 minutes the full regime takes longer than most buyers anticipate, which is the biggest reason veteran owners switch to detachable inserts, which cut that time approximately in half.

This is where new owners make the costliest error, as they do not think about storage until it is a difficulty. Hanging is best, using a heavy-duty ceiling mount rated for at least 60 kg with a dedicated loop, which maintains her in one pose without placing pressure on the joints, and this is the method most veteran owners use. Lying down works too, but be careful: smooth surfaces are fine and uneven ones aren't, and leaving her on her back for long stretches can press her buttocks or breasts flat, so vary the position periodically. UV damages both TPE and silicone and bleaches wigs and coloured parts fast, so never leave her in bright sunlight, and keep her in a wardrobe or a covered carry case.

The internet has a lot of opinions about owning dolls, most of which are mistaken or exaggerated. Yes, she's hefty and her joints need attention, but there's no need to be "careful" in the sense of fussing over her, seeing as she's designed to be used and she's not made of glass. You needn't be ashamed, seeing as huge numbers of people own sex dolls, the industry has grown tremendously in the last ten years, and the social stigma has faded rapidly, so if you've chosen to own one, that is an individual choice and not a moral failing.

You needn't treat her like a person either. Plenty of owners build complex characters and personas for their dolls, which is great and component of the appeal for many people, but it is optional, and wanting a doll for physical pleasure and companionship without the roleplay is an entirely valid way to use one. The only thing you genuinely need to get right is the hands-on side, seeing as everything else is individual taste and no one else gets a say on how you use something you've paid for.

My regime, for what that's worth, is easy, and every owner develops their own. Ahead of every session, limber up the joints, not for the full hour of the first time but for just a couple of minutes to be sure nothing is inflexible, and powder after each clean every time. Inspect the dye test on any new clothes even if you've used the same brand before, keep an extra wig ready as synthetic fabric takes longer to dry than you'd expect and you don't want to be waiting, and keep her correctly every time. It is not complex, just the process that maintains your doll in good condition for many years as opposed to months.

Most of what you have to know will come from your first month, and the mistakes you make early tend to be minor ones provided you're careful. Issues that show up later are the expensive ones, and they practically always stem from something skipped in the opening weeks. A joint limbered up too aggressively, a cloth tested on the doll instead of a cloth, a storage solution that looked fine until the weight sunk into it. Go slowly at the beginning and the rest looks after itself.

Something will eventually go wrong, so there's also the question of what to do when it does. Maybe a tear in the armpit, a loose joint, or a mark that will not come out. Panicking and assuming the doll is done for is the instinct, but nearly everything short of a snapped frame is fixable if you spot it early. Patch kits for TPE cost very little and deal with tiny rips. You can tighten or replace loose joints. Dye marks will not come out, and that is why the cloth check counts for so much. Find out which issues are fixable and stop fretting over the ones that aren't.

A doll is a major purchase that deserves proper handling, but "serious" does not mean "difficult." Free up the joints, powder her often, put away her sensibly, and you will get years out of her, but skip those things and you will be replacing her significantly sooner than you expected. The opening week is the hardest, and after that it turns into routine. More info at this The Essential Word on Sex Dolls Right Now- What to Expect 556eb52 which is worth considering with The No-Nonsense Overview of Modern Sex Dolls- What to Expect and The Ultimate Lowdown on Sex Dolls Right Now- What Actually Matters. Also check out look here not to mention resources and imp source for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Messages In This Thread
The Ultimate Primer on Sex Dolls- What to Expect - by FrankJScott - 6 hours ago

Forum Jump:


Users browsing this thread: 1 Guest(s)